1. Rip-cut 5″ strips on the table saw.
2. Cross-cut 12″ pieces on the table saw.
3. Clamp the piece vertically (90 degrees) to the table saw base.
4. Set the blade to 60 degrees.
5. Cut both ends of each piece. (Repeat for all three pieces)
6. Tape the ends of each piece together so the sharp ends meet accurately.
7. Glue one edge of each piece with wood glue.
8. Fold together and add extra tape to to secure while glue is drying.
9. Let dry for 24 hrs.
Material: 3/4″ plywood.